Blog

A Heat Pump Might Be Right for Your Home—Here’s What to Know | Reviews by Wirecutter

We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

We’ve updated some details throughout this guide, and added a new section to get you started on ground source or geothermal heat pumps. Solar Powered Heat Pump

A Heat Pump Might Be Right for Your Home—Here’s What to Know | Reviews by Wirecutter

Sign up for Wirecutter's newsletters to get independent reviews, expert advice, and the very best deals sent straight to your inbox.

Heat pumps are good for your wallet—and the world.

They’re the cheapest and most efficient way to handle both heating and cooling for your home, no matter where you live. They’re also better for the environment. In fact, most experts agree they’re one of the best ways for homeowners to reduce their carbon footprint and reap the benefits of a greener future without sacrificing comfort. In other words, they’re a win-win.

“We’ve come to see climate solutions like paper straws as being something worse than what we’re used to. But there are some places where everyone benefits, and I think heat pumps are a good example of that,” said Alexander Gard-Murray, PhD, a political economist at Brown University and co-author of 3H Hybrid Heat Homes: An Incentive Program to Electrify Space Heating and Reduce Energy Bills in American Homes. “They’re quieter. They offer more control. And at the same time, they’re going to reduce our energy demand and our greenhouse gas emissions. So it’s not just savings. It’s a quality-of-life improvement.”

But it can still feel daunting to pick the heat pump that's right for you, or even to know where to start looking. We can help.

“A heat pump is probably the biggest thing that consumers can do to help fight the climate crisis,” said Amy Boyd, director of policy for the Acadia Center, a regional research and advocacy organization focusing on clean-energy policy in the Northeast. Heat pumps also happen to rank among the quietest and most comfortable options available for home heating and cooling.

Heat pumps are essentially two-way air conditioners. In the summertime, they work like any other AC unit, removing heat from the air inside and pushing cooled air back into the room. In the cooler months, they do the opposite, drawing heat energy from the air outside and moving it into your home to warm things up. The process is especially efficient, using half as much energy on average than other electric home-heating sources. Or, as David Yuill of the University of Nebraska–Lincoln told us, “You could put in a watt of electricity and get four watts of heat out of it. It’s like magic.”

Unlike magic, however, there’s actually a very simple explanation for this result: Heat pumps have only to move heat, instead of generating it by combusting a fuel source. Even the most efficient gas-powered furnace or boiler never converts 100% of its fuel into heat; it’s always going to lose something in the conversion process. A good electric-resistance heater gives you 100% efficiency, but it still has to burn watts to produce that heat, whereas a heat pump just moves the heat. A heat pump can save you, on average, nearly $1,000 (6,200 kWh) a year compared with oil heat, or about $500 (3,000 kWh) compared with electrical heating, according to the US Department of Energy.

In states where the energy grid is increasingly reliant on renewables, electric heat pumps also emit less carbon than other heating and cooling options, all while providing two to five times more heating energy than the energy you put into it, on average. As a result, a heat pump is an environmentally friendly HVAC system that’s good for your wallet, as well. Most heat pumps also use inverter technology, which lets the compressor run at more nuanced and variable speeds, so you’re using only the exact amount of energy necessary to maintain comfort.

Almost any homeowner could potentially benefit from a heat pump. Consider the case of Mike Ritter, who moved into a 100-year-old two-family home in Boston’s Dorchester neighborhood with his family in 2016. Ritter knew the boiler was running on fumes even before he bought the house, and he knew they’d have to replace it soon enough. After getting a few quotes from contractors, he was left with two options: He could spend $6,000 to install a new fossil-fuel-based gas tank in the basement, or he could get a heat pump. Although the overall cost of the heat pump looked to be about five times higher on paper, the heat pump also came with a $6,000 rebate and a seven-year, zero-interest loan to cover the rest of the cost, thanks to Massachusetts’s statewide incentive program to encourage heat pump conversion.

Once he did the math—comparing the soaring costs of natural gas with those of electricity, as well as factoring in the environmental impact, alongside the monthly payments—the choice was clear.

“Honestly, we were shocked that we could do it,” said Ritter, a freelance photographer, after four years of heat pump ownership. “We don’t make doctor or lawyer money, and we wouldn’t have expected to be the kind of people with central heating and cooling in their house. But there’s a million ways you can spread out the costs and get rebates and get energy credits. It’s not much more than what you’re already spending on energy right now.”

Despite all the benefits, there are nearly twice as many Americans buying one-way ACs or other inefficient systems than there are buying heat pumps each year, according to Alexander Gard-Murray’s research. After all, when your old system fails, it’s logical to simply replace what was there before, as the Ritters might have. We hope this guide can help you plan and budget for a true upgrade. Otherwise, you’ll be stuck with another inefficient, carbon-intensive HVAC for the next decade. And that’s not good for anyone.

I’ve been writing for Wirecutter since 2017, covering portable air conditioners and window air conditioners, room fans, space heaters, and other topics (including some unrelated to heating or cooling). I’ve also done some climate-related reporting for outlets such as Upworthy and The Weather Channel, and I covered the 2015 Paris Climate Conference as part of a journalism partnership with the United Nations. In 2019, I was commissioned by Cornell University to create a full-length play about community responses to climate change.

Like Mike Ritter, I’m also a homeowner in Boston, and I’ve been looking for an affordable and sustainable way to keep my family warm in the winter. Although the current electric radiator system in my home works well enough for now, I wanted to know if there was a better option, especially since that system is getting pretty old. I had heard of heat pumps—I knew that the next-door neighbors had one—but I had no idea what they cost, how they worked, or even how to go about getting one. So this guide began when I started reaching out to contractors, policymakers, homeowners, and engineers to find the most efficient HVAC system that would work in my home, as well as to figure out what it would do to my wallet in the long run.

Heat pumps in general are an objectively great idea. But the decision gets a little muddier when you try to narrow it down to which specific heat pump you should get. There are reasons most people aren’t just going out to Home Depot and bringing home whatever random heat pump they find on the shelves. You can even order one with free shipping on Amazon, but we wouldn’t recommend doing that, either.

Unless you’re already an experienced home renovator, you’ll need to find a contractor to help you through your heat pump journey—and the way that works for your situation will depend on a number of factors, including the kind of home you live in, as well as your local climate and incentive programs. That’s why instead of recommending the best heat pump for most people, we’ve come up with some basic criteria to help you navigate the process of upgrading the HVAC system in your home.

For the purposes of this guide, we’re focusing primarily on air-source heat pumps (sometimes referred to as “air-to-air” heat pumps). As their name suggests, these models exchange the heat between the air around you and the air outside. Air-to-air heat pumps are the most common option for American households and are the most easily adapted into various living situations. However, you can also find other kinds of heat pumps, which pull heat from different sources. A geothermal heat pump, for example, draws heat from the ground, which requires you to excavate your yard and drill a well. We have some advice to get you started on that process as well.

The size you need depends on the size and layout of your home, your energy needs, your insulation, and more.

Air conditioning capacity is typically measured in British thermal units, or Btu. When you’re buying a window AC or a portable unit, you usually need to choose one based on the size of the room you plan to use it in. But selecting a heat pump system is a little more complicated than that. It’s still based, in part, on square footage—experts we interviewed agreed with the general calculation of about 1 ton of air conditioning (equivalent to 12,000 Btu) for every 500 square feet in your home. In addition, there is a set of standards maintained by the Air Conditioning Contractors of America trade association called Manual J (PDF), which calculates the impact of other factors such as insulation, air filtration, windows, and local climate to give you a more accurate load size for a specific home. A good contractor should be able to help you with this.

You also have a few monetary reasons to size your system correctly. Most statewide programs base their incentives on the efficiency of the system—after all, a more efficient system uses less electricity, which helps cut back more on fossil-fuel consumption. In Massachusetts, for example, you can get up to $10,000 back by installing heat pumps in your entire home, but only if the system achieves a certain performance standard (PDF) as set by the Air-Conditioning, Heating & Refrigeration Institute (AHRI), a trade association for HVAC and refrigeration professionals. In other words, an inefficient home with an under- or oversized system could actually disqualify you from a rebate, as well as add to your monthly energy bills.

A heat pump almost certainly will work in your home, because heat pumps are especially modular. “They’re able to be adapted to basically every situation,” said Dan Zamagni, the director of operations at Boston Standard Plumbing, Heating, and Cooling, the company that worked on the Ritters’ house. “Whether it’s a really old home, or we’re limited by the construction we can do in people’s homes without being too disruptive—there’s always a way to make it work.”

Zamagni went on to explain that a heat pump condenser—the part that goes outside your home—can be mounted on a wall, the roof, the ground, or even on a bracketed stand or leveling pad. Ductless systems also provide you with plenty of versatility for interior mounting (assuming you don’t already have a duct system or room to add one). Things might get a bit complicated if you live in, say, a tightly packed row house in a historic district that restricts what you can put on the facade. There are also some limits on the pipeline length that runs between the condenser and the indoor unit. But generally speaking, a savvy contractor should be able to figure something out that works for you.

When you’re buying something as expensive and long-lasting as a heat pump, you should make sure you’re getting something from a manufacturer that has a good reputation and can provide you with quality customer support for years to come. Daikin, LG HVAC, and Mitsubishi / Trane all offer warranties up to 12 years, for example, while Carrier and Rheem cover you for up to 10 years.

That being said, the heat pump you ultimately pick will likely have more to do with finding a good contractor than going with your personal preference. More often than not, your contractor or installer will be the one sourcing the parts. There may be some models that have better efficiency or distribution in certain geographic regions. And you should be confident that the contractor is familiar with this expensive equipment that they’re permanently installing in your home.

All of the manufacturers we mentioned above also have some sort of preferred dealer program—contractors that are specifically trained in their products and can provide manufacturer-approved service. Many preferred dealers also have priority access to parts and equipment. Dan Zamagni of Boston Standard, which is recognized as a Mitsubishi and Trane preferred installer, said, “We try to stick with a few brands for repetition with the installers and them knowing the equipment. Same with the sales desk, so they can all speak to this and are well trained on the products.”

Generally speaking, it’s better to find a good preferred contractor first and then take advantage of their expertise with the brands they’re familiar with. That service often comes with better warranties, too. It doesn’t do much good to fall in love with a specific heat pump only to find that no one in your area knows how to service or install it.

Looking at a heat pump’s ratings can help, but don’t focus exclusively on that. Almost any heat pump offers such major advantages over traditional equipment that it’s usually not necessary to seek out the absolute highest metrics within the heat pump category.

Most heat pumps have two different efficiency ratings. The seasonal energy efficiency ratio, or SEER, measures the system’s cooling capacity as it compares with the energy required to run the system. By contrast, the heating seasonal performance factor, or HSPF, measures the relationship between the system’s heating capacity and its energy consumption. The US Department of Energy recommends seeking out a higher HSPF in colder climates or a higher SEER in warmer climates.

Heat pumps that qualify for Energy Star status need to have a SEER rating of at least 15 and an HSPF of at least 8.5. It’s not uncommon to find higher-end heat pumps with a SEER of 21 or an HSPF of 10 or 11.

As with heat pump sizing, the ultimate energy efficiency of your entire home will depend on a number of factors in addition to the heat pump itself, such as weatherization and air filtration, the climate in which you live, and how often you plan on using your system.

Yep, if you already have a central air system in your home, you can use your existing duct system to move the air from your heat pump. And you don’t actually need ducts: Air-source heat pumps are also available in the form of ductless mini-splits. Most manufacturers offer both options, and a good contractor can advise you on setting up different zones within your home to maximize comfort and make the best use of what your home already has installed.

Heat pumps are versatile when it comes to retrofits into existing ducting, and they can also work within a hybrid system that has both ducted and ductless units, feeding off a single compressor positioned outside the house. When the Ritter family was upgrading their Boston home with heat pumps, for example, they used the existing air handlers to create a new ducted air system on the second floor, and then they added two ductless mini-splits to cover the office and the master bedroom upstairs, all of which tied back to the same source. “It’s a bit of a unique system,” Mike Ritter told us, “but in our case, it just ended up working best.”

In general, try to get a few different ideas from contractors about how to adapt your existing HVAC system. Doing so might save you some money, or it might not be worth the effort or expense. One encouraging factor we found in our research is that your existing system, whatever type it is, shouldn’t prevent you from getting a heat pump to supplement, offset, or replace what’s already there. You can adapt a heat pump to pretty much any home layout, as long as you (and, really, your contractor) know what you’re doing.

Yes, but we don’t recommend such models. Sure, if you live somewhere that has a warmer climate year-round, it might sound redundant to add a new heating system to your home. But such a system is “essentially the same piece of equipment with a few extra parts, and you can make the swap with almost no extra work,” said Nate Adams, a home-performance consultant, in an interview with The New York Times. Those extra parts cost only a few hundred dollars more, and that markup is likely to be covered by a rebate anyway. There’s also the fact that heat pumps get exponentially more efficient as the home’s temperature approaches that comfort zone in the mid-60s. So on those rare days when it does drop into the 50s, the system barely has to use any energy to warm your home back up. You’re basically getting the heat for free at that point.

If you already have an oil- or gas-powered heat source that you don’t want to replace, you have a few ways to set up a hybrid-heat or dual-heat system that uses those fossil fuels as a backup or supplement to the heat pump. This kind of system can save you some money during a particularly frigid winter—and believe it or not, it can actually be a better choice for reducing carbon emissions. We have a separate section with more details below.

The contractor you hire to install your heat pump could be more important to your overall experience (and cost) than the heat pump itself. “As everyone’s trying to price-shop around, you can find yourself with a real low-level contractor,” said Dan Zamagni of Boston Standard. “Probably the third-biggest purchase people make in their homes is heating and cooling systems, and you wouldn’t treat a car or a home purchase in the same way. People try to nickel-and-dime that, but you do get what you pay for.” In other words, if you’re paying tens of thousands of dollars for someone to make your home more comfortable, more affordable, and better for the planet, you should make sure they do it right.

While pricing varies, it’s probably going to cost you tens of thousands of dollars (and there are a wide range of rebates and tax credits available to offset that cost). Some anecdotal examples we’ve come across in conversation during this research:

These prices aren’t just for the hardware—they include labor costs, along with any specialized work such as architectural planning, wall construction, masonry installation work, and so on. While it’s a wide range, it should hopefully give you a rough idea of what to expect when you start talking to contractors.

Of course, not everyone has an easy time finding the help they need. So we’ve put together some other guidance to keep you on the path.

The fact that you’re reading this guide already gives you a good head start. For this guide, we spoke to several contractors, all of whom told us the same thing: Only about half of their heat pump customers come to them knowing ahead of time that they’re specifically looking to install a heat pump.

“Just knowing that heat pumps are an option is helpful,” 3H Hybrid Heat Homes co-author Alexander Gard-Murray told us. “I think the most important thing consumers can do is just to actively try to get a contractor who’s up on heat pumps, who can give them a good picture of what’s available with the current models, and the current climate zones.”

That being said, we don’t recommend making all of your decisions before you find a contractor. You might have your heart set on a specific heat pump model only to find that parts and service for it are hard to come by in your area (which is especially the case in a world that’s already facing other supply-chain issues). A good contractor will know what’s available, how its performance would compare with that of more traditional HVAC options, and what’s best for the climate you live in.

One of the best ways to find a contractor is to find someone else who worked with a contractor they liked. If you see a friend or a neighbor with heat pumps at their home, ask them about their experience. Check your local community social media forums on Facebook or Neighbors, as well. People may even recommend that you try a different contractor, or they may offer some advice on unexpected issues that surprised them, and all of that is helpful, too.

“Find someone you know who had a heat pump installed and ask them about it,” Gard-Murray said. “Basically anyone who installs a heat pump gets really excited about it, and you start hearing more and more. It’s like an avalanche of excitement about heat pumps. I think consumer experience is the biggest thing selling them.”

Many heat pump manufacturers, including Carrier, Daikin, LG HVAC, and Mitsubishi / Trane, all have some kind of preferred partnership program for independent contractors. To qualify, those contractors have to meet a certain level of standards in working with the equipment and thus meet the manufacturer’s ideal expectations. If a contractor has earned this seal of approval from one or more manufacturers, that’s a good sign.

Contractors’ membership in such programs is not just a testimony to their knowledge and skill, as these contractors also tend to offer better warranties on parts and labor (and have the relationships to make sure they can get the parts they need). Although most standard Trane ductless heat pumps come with a 10-year warranty (PDF), for example, a heat pump installed by a certified Trane Comfort Specialist usually has a 12-year warranty for the equipment, plus additional coverage for parts and labor directly through your contractor.

A good sign of a reliable contractor is their willingness to prepare for you a written document detailing the potential project and costs, with no commitment or payment from you. A representative might come by your home for a site visit and give you an eyeball estimate of the project costs, but if they won’t commit it to paper—before you start negotiating—that’s a huge red flag.

Before Mike Ritter settled with Boston Standard for his heat pump renovation, the two parties went through six rounds of project proposals over the course of three months before finding one that worked. Boston Standard presented a few different ideas—ducted versus ductless systems, different zoning options, and such—as well as the costs associated with each. Those documents even included information on warranties, as well as the potential rebates that Ritter could expect once the project was done. It was that sort of attention to detail that convinced him to take the leap, despite the higher up-front cost. “We didn’t know much about heat pumps beforehand,” Ritter told us. “We were planning on just replacing the boiler, but as we talked with Boston Standard, we started to realize it might actually work to put in a heat pump and get air conditioning out of the equation, as well.”

Heat pump systems are impressively modular, and there should be a way to make them work in almost any home situation. But this is also your home we’re talking about, and you’re the one who will have to live with whatever changes the contractor makes to it. A good contractor should be on the lookout for any potential problems or hiccups from the very first site visit. And that means you should be getting answers to lots of questions. Are they paying attention to the amperage on the circuit breaker, for example? Are they giving you a preliminary idea of how and where they might install the units? Are their project proposal quotes accurate and detailed?

“A lot of contractors can find themselves sort of slapping these systems in without really taking the right measurements and things that should be taken into account,” Zamagni of Boston Standard told us. He specifically mentioned things such as the software the contractor uses to size your system, and whether they’re factoring in elements like windows and weatherization. There are also acoustic considerations: Although heat pumps are typically quieter than other HVAC systems, the outdoor units still have fans and compressors and other mechanical parts that could cause problems in an alleyway or next to a bedroom window. These are the sort of questions you should ask—but you should also look for a contractor who looks for things you didn’t think to look for.

Choose a contractor who provides more than just labor. “Consumers should be asking contractors—and doing the math themselves—to understand the long-term savings, and not just the up-front costs,” said Alexander Gard-Murray.

A good contractor will understand the significance of this long-term investment and should be able to walk you through it, as well. Ideally, they also should be able to help you figure out how to pay for it, whether that’s by offering financing options or helping you secure one of the many, many heat pump rebates available. This will likely include both federal-level incentives, like those attached to the 2022 Inflation Reduction Act, as well as any programs available in your specific state. In Massachusetts, for example, the Mass Save program offers seven-year, zero-interest loans of up to $25,000 for any renovation that achieves a certain efficiency level. A good contractor should at least be aware of the full range of options available to you, and help you navigate the requirements.

One other thing to keep in mind is that these funds don’t always come from the same place, or arrive at the same time. For example, the Inflation Reduction Act provides up-front rebates for low- and moderate-income households of up to $8000. Other state-wide rebates might require you to submit a form and wait for a check to come back to you in the mail. There are also some incentives that come in the form of tax credits, so you might not even notice them until next April (by which point you’ll hopefully find yourself pleasantly surprised by the unexpected surplus).

When you’re looking at the total cost of your proposed project, think about what you’re actually getting out of the deal. It’s not just the heat pump itself. It’s also the customer service, it’s also the warranty, and it’s also the expertise and guidance on how to make your home as energy efficient as possible. Some contractors even offer additional services, such as handling all of that complex and confusing rebate paperwork. That’s a major reason Mike Ritter went with Boston Standard for his heat pump renovation: The company handled all of the paperwork as part of the proposal, saving him the hassle and headache of trying to navigate those byzantine forms.

“We collect everything from the customer, we process the rebates for them, we submit everything,” explained Zamagni of Boston Standard. “It takes the burden away from the homeowner, who may be overwhelmed with the process overall. It helps with our whole package, so it’s basically a turnkey system for them.”

While working on this guide, I did hear a few anecdotes about people who weren’t able to get the rebates they were expecting or planning on because of some miscommunication or confusion with the contractor, or some mishandled paperwork. How often this actually happens isn’t clear, but it’s still a good reminder that some things are worth being more selective on when you hire, especially when you’re already spending tens of thousands of dollars on an HVAC system that’s supposed to last you 15 years or more.

“A lot of these [HVAC replacement] decisions are made under duress, like when a system fails in the middle of winter,” said Robert Cooper, president and CEO of Embue, a company that specializes in sustainable options for multi-family buildings. “You’re going to replace it with the quickest thing that you can get somebody in there. You’re not going to shop around.”

Although we can’t prevent those kinds of emergencies from happening, we can encourage you to start thinking about your future heat pump ahead of time so you’re not ending up in a situation that forces you into a 15-year commitment to an inefficient fossil-fuel heater. It’s completely normal to take a few months to negotiate over project quotes, and then again to schedule your installation based on the availability of equipment and labor. If a potential installer tries to pressure you into acting fast, especially if you’re not in a heating or cooling emergency, that’s another red flag.

Aside from living with the equipment for 15 years, you may also be entering a long-term relationship with your contractor. If anything goes wrong, you’ll continue seeing them as long as you’re covered under warranty.

It bears repeating that heat pumps in general are not only greener and more efficient than other home heating and cooling systems but also more modular and adaptable. Up until this point, we’ve tried to focus on advice that’s broadly applicable to anyone looking to buy a heat pump. But there is some other helpful information we’ve gathered in our research that could be either absolutely crucial or completely irrelevant to you depending on your situation.

Even if you buy the most cutting-edge heat pump system available, it won’t do much if your home is drafty. Homes that aren’t sufficiently insulated can leak up to 20% of their energy, per Energy Star, further adding to the homeowner’s annual heating and cooling costs regardless of what kind of HVAC system they have. Leaky homes tend to be older and more reliant on fossil fuels, too; in fact, just one-third of US homes are responsible for nearly 75% of all residential carbon emissions, according to the US Energy Information Administration. These emissions also tend to have a disproportionate impact on low-income communities and people of color.

Many statewide incentive programs do not merely encourage but require updated weatherization before you qualify for a heat pump rebate or a loan. Some of these states also provide free weatherization consultation services. If you live in a drafty home, this is something to look into even before you start reaching out to contractors about installing a heat pump.

Most heat pumps use inverter technology. Whereas traditional air conditioners have only two speeds—completely on or completely off—inverters allow a system to run continuously at variable speeds, using only as much energy as it needs to maintain a comfortable temperature. Ultimately it uses less energy, makes less noise, and feels more comfortable pretty much all the time. The top picks in our guides to portable air conditioners and window air conditioners are all inverter units, and we highly recommend that you choose a heat pump with an inverter condenser, too.

Inverter technology also works well in conjunction with the variable efficiency of heat pump technology. You don’t have to worry about turning the system down or off when you leave the house for a while, as the system will regulate itself so well that it’ll work to maintain the temperature while barely using any energy. Turning the system on and off would actually use more electricity than just letting it run.

Heat pumps have historically been more common in Southern states, and they’ve also had a bit of a bad reputation as being less efficient or failing entirely in colder weather. A 2017 study from the Minnesota-based clean energy nonprofit Center for Energy and Environment comparing older heat pumps with more recently designed ones showed that older heat pump systems were significantly less efficient in temperatures below 40 degrees Fahrenheit. But it also found that heat pumps designed and installed after 2015 kept functioning normally down to -13 degrees Fahrenheit—and in more moderate conditions, they were two to three times more efficient than standard electric heating systems. “The colder it is outside, the harder it is for that machine to take heat from that air and move it inside,” explained Harvey Michaels, a lecturer in system dynamics and information technology at MIT Sloan. “It’s like pushing uphill.” Essentially, it’s harder for the heat pump to move the heat when it has to find that heat first—but again, that happens only in extreme conditions. If you’re worried about below-zero temperatures, your home almost definitely has a robust heating system installed already, and you might be a good candidate for a hybrid-heat or dual-heat system.

There are a few situations where installing a new heat pump and keeping your gas- or oil-fueled burner as a backup might actually be cheaper and less carbon intensive than strictly relying on the heat pump. This kind of installation is called a dual-heat or hybrid-heat system, and it works best in places that regularly deal with temperatures below freezing. Since heat pumps can be less efficient in extremely cold weather, the idea is to offset the difference by using fossil fuels to help get the room up to a temperature where the heat pump can perform best, typically somewhere between 20 and 35 degrees Fahrenheit. Think of it as being similar to how a hybrid car works.

Harvey Michaels of MIT Sloan, who has served as an advisor on state and federal climate-policy commissions, expanded on the potential of hybrid heat pumps in a 2021 article. Once the temperature starts to drop below freezing, as he explains in that article, natural gas could be a cheaper option than a heat pump, depending on local energy pricing. And even if you do turn the gas on for those coldest days, you’re still reducing your home’s carbon emissions by at least 50%, so it’s still a win for the environment.

This might sound counterintuitive on the surface: How can you reduce carbon emissions by using carbon-based energy sources? But the math bears that conclusion out. If your heat pump is operating at only 100% efficiency because of the cold weather (as opposed to the 300% to 500% at which it normally operates), you’re using three times as much of the electricity to heat your home back up to the optimal performance conditions. In a state like Massachusetts, where 75% of the energy grid comes from natural gas, that ends up using a lot more fossil fuels than if you were to just turn on the gas burner in the basement and let it get the house back up to the baseline temperature.

“Obviously we want to reduce the emissions of fossil fuels as much as possible,” said Alexander Gard-Murray, whose work on the 3H Hybrid Heat Homes report examined the way such systems can work to speed up heat pump adaptation and overall decarbonization. “If you’re thinking, ‘I’ve got a gas furnace that’s newly installed, I’m not gonna rip that out,’ but you want to get a new cooling system, they can work in tandem. And that’s something else to ask your heat pump contractor about.”

Hybrid heat systems aren’t meant to be a permanent solution but rather a transitional tool to help ease the stress on both the electrical grid and peoples’ wallets, while the utility companies make the shift toward a more renewable grid overall.

Up until now, we’ve been talking about permanent heat pump installations. While this is ultimately the best way to take advantage of this technology, we recognize that not everyone is able to make significant physical changes to their home. Maybe you’re a renter. Maybe you live in a condo or historic district with complicated renovation rules. Maybe your home has an extension that falls outside of your primary thermal envelope. Or maybe the price is just too steep for your budget right now. Whatever the reason, you may be wondering if there’s still a way to get the benefits of a heat pump with more flexibility, and without the help of a contractor.

The answer is: well, sort of.

In the course of our research and testing, we have come across a few portable and window air conditioners that offer heat pump capabilities, including the Honeywell MN4HFS9, the Midea MAW12HV1CWT, and the Frigidaire FHWH082WA1. Each of these models technically works as advertised; the Frigidaire in particular is a variation on our long-standing also-great window AC pick, while the Midea is a larger version of our top pick, without the window-saving capabilities. But that’s precisely the problem: These portable heat pumps take up valuable window and/or floor space that you might otherwise want to use. That might be a worthwhile sacrifice for part of the summer or winter, but do you really want to give up an entire window through the whole spring and autumn, too?

There are some situations where that might be appropriate. Maybe you live in a place with pretty mild winters, and have a corner office or addition with plenty of windows that could use a little climate control. In that case, the Midea MAW12HV1CWT with its inverter compressor will likely be a better and more efficient option than a standard 1500-watt space heater (even if the heat doesn’t feel quite as immediately satisfying as those infrared rays). We’d still recommend weatherizing the room as best you can, however. You’ll already be leaking some air through the gaps between the insulation and the window frame, and you don’t want to waste any more energy than that.

Like traditional heat pumps, these temporary setups work best when they’re maintaining comfortable temperatures between 60 and 70 degrees, rather than actively heating or cooling a space. Once the outside temperature drops below 40 degrees or so, you might need to find an alternative heat source. But if you live in a place with a warmer year-round climate where that’s not a problem, then a portable or temporary heat pump could be a decent option.

This article was edited by Harry Sawyers.

Although this guide has focused largely on air-source heat pumps, most of the advice we’ve offered is also applicable to ground source or geothermal heat pumps. These systems pull their heat from a 6-inch diameter water-filled pipe in the ground beneath your home, and can work in most parts of the country. Soil temperature is more consistent than air temperature; it’s also typically warmer than the air during the winter, and cooler during the summer. This makes it easier for the heat pump system to extract and move the heat (and should ideally lead to more consistent electric bills, even in the face of unexpected extreme weather events).

Of course, the added convenience of a geothermal system comes with some complications: namely, that you have to install that well in your yard. Your contractor will typically either need to excavate a horizontal well about 6 feet down, according to the US Department of Energy; or, if you’re hesitant to tear up the entire lawn, you can also drill a single vertical hole between 300 and 600 feet deep, depending on the soil. It’s also possible to combine the pipes for several properties into one collective well. Depending on where you live, this could involve a lengthy permitting process, too (plus enough space to park a drill rig).

While this certainly adds to the cost of the project, many heat pump subsidy programs offer improved incentives for ground source installations, bringing the price slightly more in-line with their air source counterparts. For example, federal tax credits for air source heat pumps are limited to $2000, whereas ground source heat pumps qualify for tax credits up to 30 percent of the cost, with no upper limit. Geothermal heat pumps also have a longer lifespan—around 25 years on average for the hardware, and 50 years or more for the pipeline itself. The upkeep costs are typically lower, too. And again, your annual energy usage should be much more predictable.

While some air source heat pump manufacturers such as Carrier, Bosch, and Trane also produce geothermal systems, most of these systems come from dedicated companies such as GeoCool and Nordic GHP. To find a local contractor that can handle the scope of the project from drilling to hardware installation, we recommend checking out EnergySage, GeoExchange, or the International Ground Source Heat Pump Association.

Mike Ritter, homeowner, phone interview, January 9, 2022

Leo Pesegoginski, project manager, Boston Standard Plumbing, Heating, and Cooling, in-person interview, February 11, 2022

Dan Zamagni, director of operations, Boston Standard Plumbing, Heating, and Cooling, phone interview, September 14, 2021

Alexander Gard-Murray, post-doctoral fellow in the Climate Solutions Lab and the Rhodes Center for International Economics and Finance at the Watson Institute for International and Public Affairs at Brown University, in-person interview, September 10, 2021

Stephen Pantano, Matt Malinowski, Alexander Gard-Murray, and Nate Adams, 3H Hybrid Heat Homes: An Incentive Program to Electrify Space Heating and Reduce Energy Bills in American Homes, CLASP, May 26, 2021

Gary Woodruff, sales manager, HD Air, phone interview, July 27, 2021

Sabrina Shankman, Massachusetts should be converting 100,000 homes a year to electric heat. The actual number: 461, The Boston Globe, August 21, 2021

Brad Plumer, Are ‘Heat Pumps’ the Answer to Heat Waves? Some Cities Think So., The New York Times, June 30, 2021

Harvey Michaels, Let’s Run Towards Hybrid Heat Pumps — to benefit Climate, Energy Savings, Health and Equity, LinkedIn, June 29, 2021

David Yuill, associate professor in mechanical and materials engineering at University of Nebraska–Lincoln, phone interview, July 28, 2021

Harvey Michaels, lecturer in system dynamics and information technology and research director of energy management practice and innovation, MIT Sloan School of Management, Zoom interview, September 2, 2021

Amy Boyd, director of policy, Acadia Center, Zoom interview, January 21, 2022

Robert Cooper, president and CEO, Embue, in-person interview, September 9, 2021

Cynthia Stone Creem and Lori A. Ehrlich, A better future for heating your home, The Boston Globe, November 23, 2021

Jon Gorey, Everything you need to know about adding heat pumps to your home, The Boston Globe, November 7, 2021

Thom Dunn is a staff writer at Wirecutter reporting on heating, cooling, and other home-improvement topics. Sometimes his curiosity gets the best of him, such as when he plugged a space heater and a Marshall guitar amp into the same power strip. Pro tip: Don’t do that.

Whole-home energy monitors can help you save on electrical bills—but you may find that there are simpler alternatives.

Save energy without extra effort by making small changes to your habits when using the dishwasher, dryer, and refrigerator.

Smart devices make life more convenient, but many also make it easy to conserve energy and water use, too.

It’s easy to say you’ll be more energy-efficient, but smart-home devices can help save water, electricity, and money without you even realizing it.

A Heat Pump Might Be Right for Your Home—Here’s What to Know | Reviews by Wirecutter

Geothermal House Heating Wirecutter is the product recommendation service from The New York Times. Our journalists combine independent research with (occasionally) over-the-top testing so you can make quick and confident buying decisions. Whether it’s finding great products or discovering helpful advice, we’ll help you get it right (the first time).